Flexible dielectric composite materials capable of converting power frequency electric fields into measurable electrical signals are of great significance in the field of non-contact electric field sensing in power systems. In this paper, graphene/nitride heterojunction powders were prepared using three representative nitrides (AlN, BN, and Si3N4) and embedded in polydimethylsiloxane (PDMS) to prepare flexible composite films with a fixed filler content of 5.0 wt%. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) confirmed the successful formation of the heterojunctions. The results showed that the nitride-related elements (Al, Si and N) were spatially correlated with the graphene-rich regions, thus providing abundant interfacial contact sites. Dielectric spectroscopy (50 Hz–50 kHz) showed that all samples exhibited typical dispersive behavior, with the real part of the dielectric constant decreasing monotonically with increasing frequency, and the loss tangent also decreasing smoothly. Under a 50 Hz parallel-plate electric field, the normalized induced voltage amplitude (PDMS = 1) increases to 1.070 (≈7.0%) for G/PDMS, and further to 1.0723–1.07447 (≈7.23–7.45%) for AlN–G/PDMS, BN–G/PDMS, and Si3N4-G/PDMS.Pour en savoir plus : Enhanced Dielectric Response and Electric Field-Sensing Properties of PDMS Composites by Graphene/Nitride Heterojunctions: Insights from Experiment and DFT
